Our Access Control products are dedicated to access control and door management. They include a variety of proximity readers at 125 kHz and 13.56 MHz.

CLID-R1: Low cost proximity card reader as Electronic Key - 125 kHz IC Card or Keytag - Read-only standalone device - Reading range : 0 to 15 centimetres - Easy programming via MasterCard - On board memory for up to 220 cardholders - Tamper switch with buzzer and digital output - LED for status information - 1 relay drive for electric clock - Small size ABS housing.

CLID-T1 : Compact Access Terminal with card reader - Slave on RS 485 main bus (up to 256 CLID-R2) - 25 kHz or 13.56 MHz read-only IC - Reading range : 0 to 30 centimetres - Real time clock - Access control software downloading from host - Tamper switch with buzzer and digital output - On board memory for 2000 cardholders and buffer for 2000 access movements -3 digital inputs; 2 NPN inputs ; 1 relay drive - On board battery back-up -Small size ABS housing.

CLID-R6 : General purpose standalone proximity card reader - RS 485 port - 125 kHz or 13.56 MHz read-only transponder - Reading range : up to 40 cm - 2 digital inputs for external triggers - Tamper switch with buzzer and digital output - Keypad option (4 x 4 keys) Wiegand & Mag stripe compatible -Small size ABS housing.

CLID-RW : On the fly Read/Write module for multifunction DuoCard^R - 8 bit 20 MHz mP and 8 Kbytes EEPROM - Dual R/W system : contact & contactless - 13.56 MHz RF communication - Reading range : up to 15 cm with standard antenna - On choice interface : RS232, RS 485, RS 422, TTL, 12C - 106 Kbps data transmission rate - Security algorithms DES/RSA - Multi channel in-terface (self-reliant multi-antenna) : up to 8 remote antenna reader ; up to 35 meters - Manifold applications (memory sharing ; 16 virtual cards).

CLID-T2/T3 : Intelligent Access Controller for building automation - RFID cards : 125 kHz or 13.56 MHz - Master on RS 485 main bus from host - dXb local bus for up to 128 readers - 1 MB on board memory, up to 16000 card-holders - Access control software downloading from host - Standalone capability (when disconnected from PC) - 814 digital in-outputs - Tamper switch and digital output - 4 relay drives - Electronic buzzer - Real Time Clock - Inte-grated power supply (25 VA) with accu - Wiegand & Mag stripe interface.